Minneapolis, MN–FasTest has expanded its line of miniature test connectors for medical device leak testing applications. Now offering metric thread options, the ME001 Series delivers mounting and media connection flexibility for testing medical devices, securely sealing ultra-thin hypodermic and catheter tubing. Capable of sealing outside diameters (OD) down to 0.38 millimeters (0.015″), the ME001 connector…
Fire-Resistant Sealant Protects Connectors, Wiring
EAST PROVIDENCE, RI ‚ IMPCO introduces Polyflex FR, the first true fire-resistant impregnation resin available for sealing electronic connectors, wires, and wiring assemblies against corrosion. The need to prevent corrosion while maintaining fire resistance is especially important for aerospace, marine, automotive and other critical electrical circuitry. A traditional solution has been to impregnate components with…
WAGO WALL-NUTS™ Connectors Undergo Extreme Testing
GERMANTOWN, WI — WAGO Corporation recently subjected the 773 Series WALL-NUTS™ PUSH WIRE® connectors to demanding shock and vibration sequence testing. The testing, which adhered to IEC standards, verified WALL-NUTS™ contact continuity (no current interruptions during testing) and housing integrity (no physical damage) under extreme conditions. In-house testing confirmed WALL-NUTS'™ suitability to a broad range…
Ductorseal® Hermetic Feedthroughs
Douglas Electrical Components, Inc. now offers Ductorseal® sealed wire and cable assemblies to solve through-bulkhead conductor sealing problems in small engine fuel delivery modules. Ductorseal feedthroughs provide an interconnecting harness in a fully sealed, pre-wired, pre-tested and ready-to-install hermetic unit. Ductorseal feedthroughs for small engine in-tank fuel delivery module applications feature a precision-machined, chemical-resistant epoxy…
Molex’s PoE+ Integrated Connector Module
LISLE, Ill. ‚– Molex Incorporated (NASDAQ: MOLX AND MOLXA) announces an industry first with the introduction of the HyperJack‚â„¢ 1000 Power over Ethernet Plus (PoE+) Integrated Connector Module (ICM) for applications in Gigabit Ethernet switches, routers, hubs and industrial Ethernet switches and routers. This multi-port module integrates magnetics to support Ethernet 10/100/1000 Mbps and embeds…
Ethernet Connectors for Explosive Environments
ATEX Ethernet connectors fit applications in zone 2 and Class I Division 2 explosive environments. The new range is a response to the current trend in the ATEX market of limiting the equipment in zone 1 (which is expensive) and installing it in zone 2, where constraints are much less demanding, leading to substantial reduction…
WAGO LUMI-NUTS™ Luminaire Disconnect
GERMANTOWN, WI ‚–‚– Install fluorescent luminaires with less labor and fewer parts. WAGO Corporation‚’s 873-902 LUMI-NUTS‚â„¢ luminaire disconnect combines the only 20A/600V line-side rating and daisy chaining capability (two conductors per pole) for class-leading installation flexibility. LUMI-NUTS‚â„¢ is the only connector that can loop power from one disconnect to the next for quick and easy…
Next-generation ZIPLink Cables from Automation Direct
Cumming, GA — The latest ZIPLink connection system reduces the time to wire DirectLOGIC and CLICK PLC I/O modules to terminal blocks. ZIPLinks use half the space at a fraction of the cost of traditional terminal block wiring arrangements. A complete selection of connection cables for discrete and analog modules is available in three pre-wired…
Fittings Eliminate Medical Tubing Misconnections
In medical settings, accidental tubing misconnections to the wrong line or device, such as an air hose to an intravenous line, can be extremely dangerous, if not deadly. The SRC panel mount-coupling insert lets healthcare workers make safer tubing connections with equipment and devices. These connectors can be integrated into a range of medical equipment…
Nickel Plated Brass Cord Grips
Nickel Plated Brass Cord Grips are designed for the toughest corrosion applications. With a temperature range of -40°C to +100°C, these connectors come complete with a neoprene sealing ring and are available in NPT, Pg & Metric Threading. They are approved to IP68 protection class. Ideal for wash down rooms, marine applications, heavy vehicles, water…