MORE INDUSTRIES

EEG sensing can improve driving safety.

Connectors in hypersonic missiles need to be small and lightweight and provide robust signal integrity for high-speed connectivity. The challenge is to provide the required performance and durability while enduring extremely high temperatures and high levels of shock and vibration. This article briefly examines the inside of a hypersonic missile and its operating environment. It […]

Diodes Incorporated announces the ZXCT18xQ series of automotive-compliant* high-precision current shunt monitors. These single-stage instrumentation amplifiers accurately measure very small sense voltages across a wide range of common-mode voltages up to 26V while operating from a 2.7V to 5.5V supply. Automotive applications include ambient lighting control, battery management, heated seats, and other body control systems. The […]

Automotive systems that impact safety require adherence to the automotive functional safety standard — ISO 26262. Those electronic and electrical systems that are interlinked to use the input from one sensor to provide different functions in the automobile and minimize system cost, have additional safety considerations. To ensure proper and verified capability, the hardware (HW), software […]

Melexis unveils the MLX91235, a new current sensor that eliminates the need for a ferromagnetic core. The MLX91235 expands Melexis’ portfolio, enabling the measurement of larger currents flowing through external primary conductors like PCB traces and busbars. It supports automotive and alternative mobility applications like inverters, battery management systems (BMSs), and low-voltage DC-DC converters. Power […]

LEM has introduced a residual current monitoring (RCM) type B sensor designed for bi-directional on-board chargers (OBCs) with ASIL B capabilities. The CDT sensor addresses safety requirements in vehicle-to-everything (V2X) applications, including vehicle-to-load, vehicle-to-grid, and vehicle-to-vehicle systems. Bi-directional OBCs enable users to power other vehicles, appliances, or homes from their EV battery pack. These systems require […]

Melexis introduces the MLX92235, a low power Hall-effect switch with precise tolerances for consistent output update rate. The device serves automotive micropower applications including door handles, e-latches, sun visors, infotainment buttons, and brake light switches. Modern vehicles use switch and latch mechanisms across multiple systems for feedback. With switches distributed throughout cars, power efficiency is essential. The […]

Following another successful PACK EXPO International, Beckhoff has announced the promotions of both Mark Ruberg and Greg Marsh. These changes will further strengthen the packaging industry management team and increase Beckhoff’s ability to support customer success in the U.S. and around the world. Marsh will serve as packaging industry manager for Beckhoff USA. Marsh has…

Novotechnik, U.S. introduces the MC-1 2800 44-Turn magnetic encoder with IO-Link output interface. Patented non-volatile technology retains turn count even when power is lost and reports correct count when power is restored. Key specifications for the MC-1 2800 include a measuring range of 15,840° (44 turns), and measured variable information of angle, turns, speed, and […]

The winners of the 2024 LEAP Awards (Leadership in Engineering Achievement Program) were announced yesterday across several categories. This year’s winner in the Switches & Sensors category is fabless semiconductor company, Mobix Labs. GOLD Mobix Labs SP10T RF Switch Mobix Labs has introduced the industry’s first high-power single-pole/ten-throw (SP10T) RF switch for the land mobile […]

The winners of the 2024 LEAP Awards (Leadership in Engineering Achievement Program) were announced yesterday across several categories. This year’s winner in the Switches & Sensors category is fabless semiconductor company, Mobix Labs. GOLD Mobix Labs SP10T RF Switch Mobix Labs has introduced the industry’s first high-power single-pole/ten-throw (SP10T) RF switch for the land mobile […]

The winners of the 2024 LEAP Awards (Leadership in Engineering Achievement Program) were announced yesterday across several categories. This year’s winner in the Switches & Sensors category is fabless semiconductor company, Mobix Labs. GOLD Mobix Labs SP10T RF Switch Mobix Labs has introduced the industry’s first high-power single-pole/ten-throw (SP10T) RF switch for the land mobile […]

Silicon Sensing Systems Ltd and Japan’s leading science and technology university, Science Tokyo, have collaboratively conducted a program to test the capabilities of the company’s DMU41 inertial measurement unit (IMU) for low earth orbit (LEO) space applications. The test program explored the use of the high-performance DMU41 for space platform guidance and attitude control in…

KYOCERA AVX expanded its line of vertical card-edge connectors with the release of the new 9159-800 Series dual-entry card-edge connectors —  the industry’s first dual-entry card-edge connectors and the lowest-profile card-edge connectors in the KYOCERA AVX portfolio. Engineered to satisfy growing cross-market demand for card-edge connectors and persistent cross-market demand for compact, space-saving connectors, the new […]

Able Electropolishing has been awarded AS9100:2016 certification for compliance with aerospace and defense industry quality management standards. Its customers include industry-leading aerospace, medical device, and automobile manufacturers. The AS9100:2016 standard requires rigorous on-site auditing and inspection, followed by annual surveillance audits to ensure adherence to all requirements, including conformity to customer, statutory, and regulatory requirements for…

Samtec announces the availability of its SLH/TLH Series printed circuit board (PCB) to board (B2B) connectors that offer an ultra-low mated stack height down to 2 mm (.078″) and support 28 Gbps NRZ performance. SLH/TLH PCB board-to-board connectors are part of Samtec’s Ultra Micro line of products that maximize overall space and offer reliable connections […]

Melexis’ MLX90424 is a cost-effective solution simplifies automotive brake pedal sensing. For functional safety purposes, it integrates two position-sensing ICs and a wake-up switch all isolated in 1 package. The solution can be powered directly by the 12 V and handles precise measurements of linear displacement up to 30 mm.  Reaching the state of the […]

Emerson will exhibit its latest Floor to Cloud packaging solutions at PACK EXPO Chicago, Nov 3-6, 2024. Advancing the boundless future of automation, Emerson factory automation solutions and its Floor to Cloud approach empower smarter packaging lines and more efficient processes that make it possible for manufacturers to continuously improve plant productivity, sustainability and safety.…

Silicon Sensing Systems’ DMU30 high-performance inertial measurement unit (IMU) continues to perform within the control system of Japan’s first X-band synthetic aperture radar (SAR) small satellite from the Institute for Q-shu Pioneers of Space Inc. (iQPS) of Fukuoka, Japan. On board the iQPS satellite, the DMU30 commences operation immediately after separation from the launch rocket…

Infineon Technologies AG launches the new automotive-qualified fingerprint sensor ICs CYFP10020A00 and CYFP10020S00. The devices are optimized for attaching to Infineon’s TRAVEO T2G microcontroller family and comply with the AEC-Q100 requirements for the automotive industry. The sensors offer powerful fingerprint identification and authentication capabilities. This makes them ideal for in-vehicle personalization and payment authentication, such […]

Infineon Technologies AG introduces the Automotive PSoC Multitouch GEN8XL (IAAT818X), a new generation of touch controllers. Designed for OLED and micro-LED displays up to 24 inches, the touch controller delivers performance and frame rates that meet today’s demands. It ensures a seamless user experience on various touch-based interfaces, such as touchscreens, touchpads, and sliders, while […]

At MinExpo last month, Continental’s ContiTech division was highlighting its latest conveyor technologies, with a focus on rugged, repairable and manageable lines. The highlight in the booth was its Phoenix Phoenocord ST10000 belt, considered the world’s strongest belt rating. Phoenix Phoenocord steel-reinforced conveyor belts are made for the harshest applications, delivering extreme durability and reliable…

Hirose has designed a two-piece FPC/FFC-to-board connector for harsh environment applications including automotive. Featuring a center lock design, the TF70 Series allows for easy, one-handed insertion and removal, ensuring durable performance with a locking strength of more than 40N. A guide key prevents mis-insertion, and a clear tactile click indicates complete and proper mating. Assembly […]

Hirose has designed a two-piece FPC/FFC-to-board connector for harsh environment applications including automotive. Featuring a center lock design, the TF70 Series allows for easy, one-handed insertion and removal, ensuring durable performance with a locking strength of more than 40N. A guide key prevents mis-insertion, and a clear tactile click indicates complete and proper mating. Assembly […]

Master Bond EP3HT-LO is a single-component, non-premixed and non-frozen, heat-cured epoxy with an unlimited working life at room temperature. This system passes ASTM E595 tests for NASA low outgassing, making it well-suited for use in the aerospace, electronic, microelectronic, and optical industries. EP3HT-LO features a good strength profile, with a lap shear strength of 1,600…