masterbond

Master Bond EP4CL-80Med is a one-part, optically clear epoxy developed for use in medical device assembly applications. It withstands repeated sterilization cycles and passes ISO 10993-5 testing for non-cytotoxicity. As a one-part, non-premixed and frozen system, it contains no solvents and has an “unlimited” working life at room temperature. Suitable for bonding, sealing, impregnating, and…

Master Bond EP40ND is a new two-component epoxy system designed for bonding, sealing, and coating applications. It’s a non-drip, toughened system with an easy-to-use 1:1 mix ratio by weight or volume. EP40ND meets NASA’s low-outgassing specifications and has a high elongation of 80 to 90% at 75° F. It adheres well to several plastics, such…

Master Bond‘s EP17TF is a one-part epoxy with a paste consistency that can be readily dispensed evenly and uniformly. It has a moderately high-glass transition temperature (Tg) of 150° to 155° C and a wide service temperature range of -150° to +550° F. This new compound resists impact, vibration, shock, and rigorous thermal cycling. EP17TF…

Master Bond‘s new UV17Med is a one-part, no-mix, UV curable system. It was specially formulated to provide excellent adhesion to many TPUs (thermoplastic polyurethanes), which are widely recognized as challenging substrates for bonding. This compound provides excellent toughness, with a high elongation of 50 to 60%, passing stringent ISO10993-5 cytotoxicity standards. UV17Med cures in 10…

Master Bond‘s MasterSil 323 is a two-component, addition-cured system for bonding, sealing, and potting applications. This product has a convenient to use 1:1 mix ratio and can be packaged in double-barrel cartridges for dispensing from a gun applicator. It allows for the application of thin and thick sections, depending on the application. MasterSil 323 is…

Master Bond, a manufacturer of epoxy adhesives, sealants, coatings, has released a new demonstration video using a fast-curing epoxy compound — EP65HT-1. This epoxy is used to show how a fast-curing compound can set-up quickly and easily at room temperature. Master Bond’s EP65HT-1 is a two-component epoxy system, featuring a combination of extremely fast set-up…

Master Bond‘s EP4G-80Med is a one-part epoxy that’s designed for use in the assembly of medical devices. It complies with the ISO 10993-5 guidelines and is considered to be non-cytotoxic. This system is formulated with a non-metallic, graphite filler, which leads to good thermal and electrical conductivity. It possesses a thermal conductivity of 1.44-1.73 W/(m•K) and…

Get to know the facts on Master Bond‘s EP21TCHT-1, a cryogenically serviceable epoxy that can withstand temperatures from 4K to +400° F — making it suitable for use in cryogenic, vacuum, and other harsh environments. Master Bond, a manufacturer of epoxy adhesives, sealants, coatings, potting, and encapsulation compounds, has created an infographic with all the…

Master Bond‘s EP35AOLV is a two-part, heat-cured epoxy system, designed for bonding, sealing, coating, and potting applications. It is a thermally conductive, electrically insulating compound that withstands aggressive chemicals, such as those found in downhole oil and gas processing. The new EP35AOLV exhibits superior protection against corrosion in various harsh environments and helps prolong longevity…

Microelectronics devices composed of integrated circuits are complex and pose many engineering challenges. A careful design must be employed to allow heat to be dissipated from the device and mitigate thermally induced stresses. To this end, methods are required to form the electrical connection between an integrated circuit chip (also called a die) and the…