EpoxySet will introduce ground-breaking chemistry that will revolutionize adhesive bonding. The FlashSet UV-5608DC is a one part epoxy that can be activated by 405nm light with an intensity of about 150mW/cm2 for 5-10 seconds. Parts are then mated together and aligned within 45-60 seconds of activation. The adhesive will yield green strength after 30 minutes…
High temperature Epoxy for sealing and bonding
EpoxySet offers EB-119M, a long work life, high temperature epoxy for optics, electronics and engineered applications where a fast cure, is required. The EB-119M is a heat cured polymer that can operate continuously at 230°C without degradation or damaging sensitive parts. It provides strong bonds to glass, metal and ceramic making it the perfect choice…
Common causes for adhesive problems
Edited by Mike Santora High tech adhesives are reliable and issues do not occur often. When used correctly, they can resolve many design problems while also saving money, time and effort. However, there are many possibilities for failure when using these materials. Failure can be defined as no adhesion upon cure, reduced adhesive strength or…
7 tips to get the best adhesive
by Paven Patel, General Manager and Barry Siroka, Business Development Manager, EpoxySet The process of evaluating and choosing an adhesive is easier when you consider a few key parameters. Choosing the best adhesive for a specific application can be complex. There are many variables to consider and numerous types of chemistries with different capabilities. An…
Urethane Sealant and Encapsulant from EpoxySet
EpoxySet announces the release of the SetWorx U-SEAL 15FL. This state-of-the-art urethane has a 2:1 mix ratio that yields a durable, abrasion resistant sealant for plastics, metals and glass or can be used as an encapsulant where low stress is required. It offers excellent protection from moisture at temperatures up to 100° C. The U-SEAL…