Dymax Corporation, a manufacturer of rapid curing materials and equipment, recently announced PVA as a new distributor of Dymax materials for North America. This agreement involves the distribution of Dymax innovative adhesives, maskants, and conformal coatings. PVA is a global supplier of automated dispensing and coating systems with nine locations throughout North America. PVA automated systems are commonly used to apply…

Dymax, global manufacturer of rapid-curing materials and equipment, is introducing its new 2000-MW series of light-curable adhesives, which were specifically developed to address customer requirements and market trends within the rapidly evolving medical-device wearables market.  This new range of structural medical adhesives are the first to pass the ISO 10993-10 for sensitization and irritation. This means…

Dymax, a manufacturer of advanced rapid and light-curable adhesives, has launched a new LED spot-curing system, which offers a 360-degree cure for those hard-to-reach areas on complex components. UV spot curing can offer advantages over conventional adhesive assembly methods. Depending on the application, benefits include speed, energy efficiency, and a more consistent output. Light can also…

Dymax, a manufacturer of advanced rapid and light-curable adhesives, has launched the next generation of its light-curing system. The BlueWave 200 version 3.0 is a high-intensity, light-curing spot-lamp system. This unit emits energy in the UVA and visible portion of the spectrum (300-450 nm) for the light curing of adhesives, coatings, and encapsulants. Ideally suited…

Dymax, manufacturer of rapid light-curing materials and equipment, has developed a light and/or heat-curable cationic epoxy for active alignment of camera modules, optical components, light detection and ranging (LiDAR), and other advanced driver-assistance systems (ADAS) assemblies used in automotive applications. Optical components, lenses in cameras, CCD chips, or complex optical devices need to be positioned…

Dymax, a manufacturer of rapid light-curing materials and equipment, has developed a light and/or heat-curable cationic epoxy for active alignment of camera modules, optical components, light detection & ranging (LiDAR), and other advanced driver-assistance system (ADAS) assemblies used in automotive applications. The new Dymax 9803 offers very low volumetric shrinkage, high Tg, and low coefficient…

Dymax, a manufacturer of rapid light-curing materials and equipment, has published a new white paper that describes the benefits of using light-curable adhesives for active alignment of camera modules, optical components, and LiDAR assemblies in automotive applications. Authored by Dr. Dave Dworak, the “Dymax Active Alignment Adhesives and Their Use in LiDAR and Optical Assemblies,”…

  Dymax, a manufacturer of light-curing materials and curing devices, recently launched an innovative, Low Shrink OP-81-LS epoxy-based adhesive. With UV or visible light, this adhesive cures within seconds with almost zero shrinkage, enabling fast and precise assembly of optical components. In addition to very low volume shrinkage during curing, Dymax Low Shrink OP-81-LS is…

U.S. manufacturer, Dymax, is extending its distribution partnership with Biesterfeld for light-curing adhesives, casting compounds, and conformal coatings, primarily used in medical technology, industry, and electronics. Dymax is a global manufacturer of advanced light-curable adhesives, coatings, light-curing equipment, and fluid dispensing systems. Biesterfeld AG is the strategic holding of the Biesterfeld group of companies, a distributor…