Fastener Engineering

  • Home
  • Fasteners
    • Nuts, bolts, rivets
    • Screws
    • Spacers + standoffs
    • Pins
    • Uclips + U-nuts
    • Eyebolts, rod ends, etc.
    • Thread repair kits + lockers
  • Adhesives
  • Springs
    • Compression
    • Constant force
    • Spring clip
    • Torsion springs
  • Washers / Spacers
    • Gaskets and Seals
  • Tools
  • Materials
  • Resources
    • Digital Issues
    • Leadership in Engineering
    • Suppliers
    • Video
  • Women in Engineering

Gore® Protective Vent Improves Reliability of Electronic Displays

By Editor | December 6, 2012

W. L. Gore & Associates has expanded its line of adhesive vents with a new product specifically engineered for small enclosures, such as displays for electric bikes, mobility aids, and heavy-duty equipment. With the smallest footprint in the GORE® Protective Vent line, the VE80205 vent improves the integrity, reliability and safety of electronic components in harsh weather by equalizing pressure and reducing condensation.

Despite the limited amount of free space and air volume inside small enclosures, sudden changes in environmental conditions can cause internal pressure to build up, sometimes as much as 200 mbar (3 psi). This level of pressure differential can put significant stress on seals, eventually causing them to fail. The VE80205 vent rapidly equalizes the internal pressure by allowing air to flow freely into and out of the enclosure. In addition, the breathable membrane that is incorporated into the vent reduces condensation by allowing moisture vapor to escape from the enclosure. At the same time, this membrane protects the electronics from liquids and particulates by providing a durable barrier that meets IEC’s IP67 standard.

GORE®-VE80205-Adhesive-Vent-A

Available in standard packaging of five parts across a 41-millimeter wide carrier, the two-by-five millimeter (2.0 x 5.0 mm) VE80205 vent has a typical airflow of 103.62 ml/min/cm2 and is constructed with a robust adhesive that withstands challenging environments and adheres to different product surfaces. This durable construction enables the vent to be installed manually or with an automated process on either the internal or external wall of the enclosure without compromising its performance.

W. L. Gore & Associates, Inc.
www.gore.com

Tell Us What You Think! Cancel reply

Related Articles Read More >

Metcase’s all new metal enclosures website
Wall mount Polycarbonate enclosures
Mini-rack 19-in. enclosures are fully customized to order
Altech-GEOS-Enclosures
GEOS enclosures from Altech Corp.

MC2

Motion Control Classroom

Stay Connected

Resources

engineering whitepapers

Engineering White Papers brings a free library of engineering white papers, catalogs, software white papers and technology white papers on hundreds of engineering related topics.
Fastener Engineering
  • Fastener Suppliers
  • Advertise
  • About
  • Subscribe
  • Contact Us

Copyright © 2022 WTWH Media LLC. All Rights Reserved. The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of WTWH Media
Privacy Policy | Advertising | About Us

Search Fastener Engineering

  • Home
  • Fasteners
    • Nuts, bolts, rivets
    • Screws
    • Spacers + standoffs
    • Pins
    • Uclips + U-nuts
    • Eyebolts, rod ends, etc.
    • Thread repair kits + lockers
  • Adhesives
  • Springs
    • Compression
    • Constant force
    • Spring clip
    • Torsion springs
  • Washers / Spacers
    • Gaskets and Seals
  • Tools
  • Materials
  • Resources
    • Digital Issues
    • Leadership in Engineering
    • Suppliers
    • Video
  • Women in Engineering