The Vortex A/CTM cooling system comes in three models that produce 900, 1500, or 2500 BTUH of refrigeration in environments to 175 degrees F (79 degrees C). It has a UL-listed, integrated thermostat to maintain enclosure temperatures within 80 to 90 degrees F (27 to 32 degrees C) and operates at about 62 dBA. ITW…
Low-Profile T-Handle Toggle Clamps
Low-profile T-handle toggle clamps come in both steel and stainless steel. All three sizes are available with an optional safety lock that automatically engages when the clamp is closed. It remains locked until manually disengaged by pushing a lever before opening. The clamps have holding capacities from 150 to 750 lb. Carr Lane Mfg. Co.…
Remke Master Catalog Now Online
Remke Industries’ master catalog is now online at www.remke.com. It gives detailed product information for the complete line of Tuff-Seal Wire Management Products and Tuff-Link Industrial Interconnects and Cordsets. Users can search the catalog by keyword, part number, or perform an attribute-specific parametric search. Navigation through the online catalog is easy. Simply choose which product…
Right Angle SMA Coaxial Cables
YouForm jacketed hand-formable cables have stainless steel SMA plugs on each end. They now come in straight and right angle configurations. 100% VSWR tested 1.35:1 at 18 GHz for SMA Straight connectors and 1.35:1 at 12.4 GHz for SMA right angle. The cables come in 2 diameters: 0.085 (0.102 OD) and 0.141 (0.161 OD). Lengths…
Dual Cooling System for Large Enclosures
A new Dual Cabinet Cooler System protects sensitive electronics by keeping electrical enclosures cool. It cools to 20° F and has a cooling capacity from 4,000 to 5,600 Btu/hr. Models with lower cooling capacity are available. The system is suitable for large electrical enclosures and high heat loads. The system cools ordinary compressed air using…
Precision Linear Shaft
Most MISUMI precision linear shaft can be configured in 1mm increments. They have a consistent hardening depth and a light pre-load. This minimizes clearance design between the shaft and the bushing. This allows for smoother, more precise and quieter operation. Outside diameter sizes range from 3 to 50mm and lengths from 10 to 1500mm. Shafts…