Flexicon recently released a mobile tilt-down flexible screw conveyor system for manual dumping and bulk bag discharging. The system is mounted on a portable base with a multi-purpose hood and an integral dust collector. This allows manual dumping from handheld sacks and discharging from bulk bags, transferring material to elevated downstream process equipment and storage vessels at multiple plant locations, dust-free.
Airborne dust generated by either process is drawn away from the operator’s area through the dust hood by a side-mounted BAG-VAC dust collector vented from the hood. To maintain operational efficiency, reverse-pulse air jets on a timed cycle remove accumulated dust build-up on filter surfaces, dropping it to the bottom of the dust collector for later removal and disposal.
The flexible screw conveyor features an inner stainless-steel screw of specialized geometry to propel both free- and non-free-flowing bulk materials including products that pack, cake, smear, seize or fluidize, with no separation of blends.
The support boom and conveyor assembly can be tilted down to maneuver through standard doorways and aisles, and around corners for use anywhere in the plant. A low center of gravity maximizes stability during operation and when rolling the unit between multiple processing tasks and wash-down stations.
When fully lowered, the tilt-down mechanism positions the clean-out cap of the conveyor tube higher off the plant floor, and the conveyor’s discharge closer to the floor, allowing removal and re-insertion of the flexible screw from standing height during cleaning and inspection.
The unit is constructed of carbon steel with a durable industrial coating. All stainless steel construction with material contact surfaces finished to sanitary standards is also available.
You may also like:
Filed Under: Fastening + joining
Tell Us What You Think!